Soft Washing and Power Washing

Pressure washing is the use of high-pressure water to clean surfaces such as driveways, decks, siding, and concrete. It effectively removes dirt, mold, grime, and other contaminants.

Pressure washing uses unheated water at high pressure, while power washing uses heated water, which can be more effective for stubborn stains, grease, or mold.

The frequency of driveway cleaning depends on factors like usage, climate, and surrounding environment. Generally, pressure washing your driveway once or twice a year is sufficient to maintain its appearance and prevent buildup of dirt and grime. Scheduling these cleanings in the spring and fall can be particularly effective

We prioritize the safety of your pets and plants by using eco-friendly cleaning solutions. Although some soft washing solutions contain diluted bleach, they are designed to be safe for the environment when used properly. However, it’s advisable to keep pets away from treated areas until they are dry and to rinse plants with water before and after the cleaning process to minimize exposure.

This depends on the size of the area. For an average driveway, it might take 1-2 hours. Cleaning an entire house could take 3-6 hours.

It is not necessary for you to be home during the cleaning process, provided we have access to the areas being cleaned and any necessary arrangements have been made in advance.​

Yes, we can remove rust stains from various surfaces. Pressure washing, combined with appropriate cleaning solutions, can effectively eliminate rust stains from concrete and other materials. The process involves applying a cleaning agent to the stained area, allowing it to sit, and then rinsing it off with a pressure washer.

Pressure washing alone may not fully remove oil stains. For best results, you may need to use a degreaser or a cleaning agent designed for oil before washing.

Yes, pressure washing can effectively remove mold and mildew. Using a cleaning solution specifically designed for mold will improve results.

Yes, if done incorrectly. High pressure can damage delicate surfaces like wood, painted surfaces, or windows. It’s important to use the appropriate pressure settings for different materials.

Common surfaces include concrete driveways, sidewalks, decks, fences, siding (vinyl, brick), patios, and outdoor furniture. More delicate materials like wood or glass may require special care.

It depends on your environment, but generally, once a year is sufficient for most homes. However, homes in areas with heavy pollen, dust, or moisture may require more frequent cleaning.

Sealing surfaces after pressure washing is recommended, especially for concrete driveways and patios. Sealing helps protect the surface from water penetration, stains, and damage caused by weather conditions, thereby extending its lifespan and maintaining its appearance. It’s advisable to wait at least 24-48 hours after pressure washing before applying a sealant to ensure the surface is completely dry.

Yes, but care must be taken. For softer surfaces like wood or siding, lower pressure settings should be used. Vinyl siding, brick, and concrete can generally withstand higher pressures.

You can do it yourself if you have the right equipment and knowledge, but professionals have experience in using the correct pressure and cleaning solutions for various surfaces, reducing the risk of damage.

Sometimes, yes. For certain stains like oil, mold, or mildew, special detergents or cleaners may be necessary. Most pressure washers come with a built-in detergent dispenser.

It depends on the pressure washer, but most use between 2 and 5 gallons of water per minute. Pressure washing can actually use less water than standard hose washing because it’s more efficient.

Absolutely! Pressure washing removes grime, mold, and dirt, which can make surfaces look new again. It’s an effective way to brighten the appearance of your home.